Hi -
Can anyone help resolve this issue? Device Manager shows "Universal Serial Bus (USB) Controller" listed under "Other devices" with a warning "There is no driver selected for the device information set or element." I uninstalled it and ran "scan for new hardware". System reinstalled it with same error message. Tried "update driver" and that failed. Right-clicked on device name > Properties:
Device Description: Universal Serial Bus (USB) Controller
H/W ID: PCI\VEN_8086&DEV_8C31&SUBSYS_05B71028&REV_05
PCI\VEN_8086&DEV_8C31&SUBSYS_05B71028
PCI\VEN_8086&DEV_8C31&CC_0C0330
PCI\VEN_8086&DEV_8C31&CC_0C03
Config Flag: 00000040
CONFIGFLAG_FAILEDINSTALL
Location Information: PCI bus 0, device 20, function 0
Physical Device Object Name: \DEVICE\NTPNP_PCI0002
Checked System Information; results below:
Name Intel(R) 8 Series/C220 Series SATA AHCI Controller - 8C02
Manufacturer Intel
Status OK
PNP Device ID PCI\VEN_8086&DEV_8C02&SUBSYS_05B71028&REV_05\3&11583659&0&FA
I/O Port 0x0000F070-0x0000F077
I/O Port 0x0000F060-0x0000F063
I/O Port 0x0000F050-0x0000F057
I/O Port 0x0000F040-0x0000F043
I/O Port 0x0000F020-0x0000F03F
Memory Address 0xF7316000-0xF73167FF
IRQ Channel IRQ 19
Driver c:\windows\system32\drivers\msahci.sys (6.1.7601.17514, 30.38 KB (31,104 bytes), 11/20/2010 10:23 PM)
Name ATA Channel 0
Manufacturer (Standard IDE ATA/ATAPI controllers)
Status OK
PNP Device ID PCIIDE\IDECHANNEL\4&7B377EC&0&0
Driver c:\windows\system32\drivers\atapi.sys (6.1.7600.16385, 23.56 KB (24,128 bytes), 7/13/2009 7:19 PM)
Name ATA Channel 1
Manufacturer (Standard IDE ATA/ATAPI controllers)
Status OK
PNP Device ID PCIIDE\IDECHANNEL\4&7B377EC&0&1
Driver c:\windows\system32\drivers\atapi.sys (6.1.7600.16385, 23.56 KB (24,128 bytes), 7/13/2009 7:19 PM)
Any idea what's causing this or how to fix it?
Thanking you in advance...