Hi everyone,
we encounter some issues with embedded intel RAID.
Descripition of the problem :
- we put 3 WD Red HDD in the PC
- we create a RAID5 volume on the three disks
- we install Windows Server 2012 R2
- after the first or second reboot of the OS
- either the system hang on the RAID summary interface
- some times is pass by this screen and Windows fails loading with BCD error
- some times we need to power reset the system and get an "Error Occured (0)"
- or we have one drive having "Error Occured (0)"
Same happens when we try with RAID 1
Mobo: Jetway NF9J-Q87
CPU ; i5 4690
RAM : Corsair 16Gb
Intel ROM version : 12.6.0.1867
Intel RST version : 13.6.0.1002
Edit : no need to wait for windows installation. If we just configure the RAID, reboot few times, it becomes corrupted with a disk either "Error Occured" or "Non RAID disk".
Edit 2 : Everything is fine with WD RE4 1TB / WD Red 1TB. So far the problem is with Red 4TB. We are currently testing Red 2TB
Any advice ?