On a X58 motherboard, I configured four disks in RAID10. I expected that to survive the failure of one disk. Is that not the point of RAID?
When I checked the console, the machine was trying to boot off the network, so I reset it and went into Ctrl+I. It offered to recover the
array, which I agreed to. It booted, and then started rebuilding. Things seemed OK, but very slow.
The next day I was greeted by a gray screen with a working mouse cursor. I reset the machine, and removed the faulty disk and put in a new one. But it would not boot. I tried with a different disk. I tried with three disks. I made a clone of the disk using a disk cloner, but it still wont boot.
Is there anything I can do now?