Hello EveryOne,
I had to disable Acceleration in Intel Rapid Storage Technology to Change SATA Mode to AHCI inorder to boot RedHat alongside Windows as Linux installation is not supported in mSATA operating mode.
After the successful installation I switched back the SATA mode to Intel Smart Response Technology. I opened up the IRST but there was no option for enabling the acceleration for caching. Here is a screenshot of the program:
I messed up everything. Please help me enabling the acceleration back.
Here is the detailed system info:
System Report
System Information
OS name: Microsoft Windows 7 Professional
OS version: 6.1.7600 7600
System name: TUSHAR-ULTRABOK
System manufacturer: Dell Inc.
System model: Inspiron 5423
Processor: GenuineIntel Intel64 Family 6 Model 58 Stepping 9 1.701 GHz
BIOS: Dell Inc., A10
Intel® Rapid Storage Technology enterprise Information
User interface version: 12.5.0.1066
Language: English (United States)
RAID option ROM version: 11.6.0.1702
Driver version: 12.5.0.1066
ISDI version: 12.5.0.1066
Storage System Information
RAID Configuration
Hardware Information
Controller name: Intel(R) Mobile Express Chipset SATA RAID Controller
Type: SATA
Mode: RAID
Number of SATA ports: 3
Number of volumes: 0
Number of spares: 0
Number of available disks: 2
Rebuild on Hot Plug: Disabled
Manufacturer: 32902
Model number: 10282
Product revision: 4
Direct attached disk: TA95123VGZ6ZKX
Direct attached disk: S0XLNSAC532389
Disk on Controller 0, Port 0
Status: Normal
Type: SATA disk
Location type: Internal
Usage: Available
Size: 466 GB
System disk: Yes
Disk data cache: Enabled
Command queuing: NCQ
SATA transfer rate: 3 Gb/s
Model: Hitachi HTS545050A7E380
Serial number: TA95123VGZ6ZKX
SCSI device ID: 0
Firmware: GG2OA7A0
Physical sector size: 4096 Bytes
Logical sector size: 512 Bytes
Disk on Controller 0, Port 1
Status: Normal
Type: SATA SSD
Location type: Internal
Usage: Available
Size: 30 GB
System disk: No
Disk data cache: Enabled
Command queuing: NCQ
SATA transfer rate: 6 Gb/s
Model: SAMSUNG SSD PM830 mSATA 32GB
Serial number: S0XLNSAC532389
SCSI device ID: 1
Firmware: CXM12D1Q
Physical sector size: 512 Bytes
Logical sector size: 512 Bytes
ATAPI device on Controller 0, Port 4
Location type: Internal
SATA transfer rate: 1.5 Gb/s
Model: HL-DT-ST DVD+/-RW GU60N
Serial number: KX7C6L12956
Firmware: A103