Hi
I've just got a new PC and I am building a Boeing 737 Cockpit.
The spec of the PC is
Operating System - Windows 7 Home Premium 64-bit SP1
CPU - Intel Core i7 4790K @ 4.00GHz Haswell 22nm Technology
RAM - 16.0GB Dual-Channel DDR3 @ 1199MHz (11-13-14-32)
Motherboard - Gigabyte Technology Co., Ltd. Z97X-Gaming 5 (SOCKET 0)
Graphics - 4095MB NVIDIA GeForce GTX 970 (ASUStek Computer Inc)
Storage - 232GB Samsung SSD 850 EVO 250G SCSI Disk Device (SSD)
2794GB Western Digital WDC WD30EZRX-00DC0B0 SCSI Disk Device (SATA)
223GB Crucial_ CT240M500SSD1 SCSI Disk Device (SSD)
Optical Drives - PIONEER BD-RW BDR-S09 SCSI CdRom Device
Audio - Realtek High Definition Audio
I am using software called Prosim737 to simulate the various devices.
There are a lot of USB devices connected.
They are all USB 2 devices so I am not connecting anything to the USB 3 ports on my PC. However the error message I got refers to USB 3.0 eXtensible Host Controller (see below)
On start-up I noticed some of my devices were missing in Prosim737.
I then got the following message
Here is a full explanation of my setup and some USBview screenshots of how things are connecting.
Maybe someone who understands the technical side of the USB interface and USBview can explain the screenshots. And maybe see where I am having a problem?
Here is a detailed explanation of the way my USB system & devices are setup.
I have 6 USB 2.0 cables going into the Computer.
================================================
No - Device
== ===========================================
01 - Trust 10 port powered USB 2.0 HUB (Overhead)
- Leo Bodnar BU0836X
- Leo Bodnar Button Box
- Leo Bodnar Button Box
- Leo Bodnar Button Box
- Phidgets LED 64
- Phidgets LED 64
- FDS Electric & Pressure OH panels
02 - Trust 10 port powered USB 2.0 HUB (MIP)
- Saitek Pro Flight Combat Rudder Pedals
- Leo Bodnar BU0836 (TQ)
- Leo Bodnar Button Box (F/O EFIS)
- Pokeys 65U IO card
- Plasma-MM2 (Captain Yoke)
- Leo Bodnar BU0836 (F/O Yoke)
03 - Trust 10 port powered USB 2.0 HUB (GoFlight Comms)
- GoFlight GFP8
- GoFlight GF-46
- GoFlight GF-166
- GoFlight GF-166
- GoFlight GF-166
- GoFlight GF-166
04 - FDS I/O Card on JetMax
05 - FDS JetMax MCP & EFIS
06 - Trust 10 port powered USB 2.0 HUB (Fire Panel
- Leo Bodnar BU0836X
- Phidgets LED 64
Cables 1,2,3 and 6 are from a Trust 10 port powered USB 2.0 HUB
For the HUBs I've used see this URL (http://www.trust.com/en/all-products/16131-10-port-usb-20-desktop-hub)
Hub on cable 01 has 7 x USB 2.0 devices attached (see 01 above for device details)
Hub on cable 02 has 6 x USB 2.0 devices attached (see 02 above for device details)
Hub on cable 03 has 6 x USB 2.0 devices attached (see 03 above for device details)
Hub on cable 06 has 2 x USB 2.0 devices attached (see 06 above for device details)
I then used microsoft's USBView.exe to examine the USB devices on the motherboard/PC with various configurations.
I took screenshots of the results. See the filename for a description of what is connected to the motherboard/PC in the screenshot.
Please see screenshots attached (UPLOADED) for your use.
USBView00 - No USB Devices connected to any port.jpg
USBView01 - HUB 1 in USB3 port on rear.jpg
USBView02 - HUB 2 in USB3 port on rear.jpg
USBView04 - HUB 3 in USB3 port on rear.jpg
USBView05 - HUB 4 in USB3 port on rear.jpg
USBView06 - HUB 5 in USB3 port on rear.jpg
USBView07 - HUB 6 in USB3 port on rear.jpg
USBView08 - HUB 1 in USB2 port on rear.jpg
USBView09 - HUB 6 in USB2 port on rear.jpg
USBView10 - HUB 5 in FRONT LEFT usb3 port.jpg
USBView11 - HUB 5 in FRONT RIGHT usb3 port.jpg
[img]
http://i59.tinypic.com/1zq31wp.jpg[/img]
Using all of this information can you tell me the best way to connect these devices so that all devices are working and I do not get the error message?
I've just noticed a couple of things.....
USBView08 - HUB 1 in USB2 port on rear.jpg
USBView09 - HUB 6 in USB2 port on rear.jpg
- Although these are connected through the USB2 port on the back of the PC they are showing up on USB3 in USBview
USBView10 - HUB 5 in FRONT LEFT usb3 port.jpg
USBView11 - HUB 5 in FRONT RIGHT usb3 port.jpg
- These 2 screenshots are the same as [b]USBView00 - No USB Devices connected to any port.jpg[/b] . Does that mean these 2 ports are not working?
I have updated the USB3 eXtensible Host Controller driver to the latest Intel driver (feb 2015)
I have also updated the BIOS on my motherboard (Gigabyte Z97X gamer 5) to the latest (non Beta) version F5.
Help.........